|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
07-05-2020, 05:41 PM | #1 |
Senior Member
Join Date: May 2010
Location: FP, NJ
Posts: 2,771
|
Wet sand blasting??
I'm pretty much finished with sand blasting on my project but I came across this about sand blasting with a power washer. It seems that it might be worth it for the elimination of all the dust. Has anyone tried this or have. an opinion? Thanks!
https://diysandblast.com/products/x?...pQxBmLKO0eSnGs
__________________
Don't never get rid of nuthin! |
07-05-2020, 06:36 PM | #2 |
Senior Member
Join Date: Jul 2011
Location: SF Bay Area
Posts: 6,679
|
Re: Wet sand blasting??
Id say let someone else go first. Both sandblasters and pressure washers are well designed and very effective if used correctly by themselves, so why mess with success?
__________________
Alan |
Sponsored Links (Register now to hide all advertisements) |
|
07-05-2020, 07:13 PM | #3 |
Senior Member
Join Date: May 2010
Location: upstate SC
Posts: 2,986
|
Re: Wet sand blasting??
40 years ago we wet sand blasted-simply a water halo around the blast nozzle, now we see a sandblaster with sand mixed into the water under relatively high pressure. I have used a sandblaster with the pressure washer and it works good but it can have sand flow problems if sand is not kept completely dry--which is hard to do around water. I used it on wood and metal-gives a fine finish just need to work on the sand flow somehow as opposed to the suction feed it came with
|
07-05-2020, 08:10 PM | #4 |
Senior Member
Join Date: Dec 2010
Location: North of sandy ago, CA.
Posts: 2,066
|
Re: Wet sand blasting??
Surface rust very quickly on iron.
Bruce
__________________
Works good Lasts long time |
07-05-2020, 08:15 PM | #5 |
BANNED
Join Date: May 2010
Location: Wa.
Posts: 5,423
|
Re: Wet sand blasting??
Since the 50's there has been a process called liquid honing which is nothing more than a sophisticated blast cabinet with the blast media mixed with a water based coolant.
It produces a very fine satin finish. |
07-05-2020, 08:23 PM | #6 |
Senior Member
Join Date: May 2010
Location: Bethany, Ok
Posts: 382
|
Re: Wet sand blasting??
Sponsored Links (Register now to hide all advertisements)
The sand has to very clean. If it has a larger chunk it will clog the nozzle and force water pressure back up the sand hose and yes,you will have wet cpogged sand in the sand hose. |
07-05-2020, 11:45 PM | #7 |
Senior Member
Join Date: Apr 2015
Location: Sweden
Posts: 3,045
|
Re: Wet sand blasting??
Downside to wetblasting is you canīt sweep the media into a pile and shovel it back into the blasting pot...
So you need media enough for the entire job canīt reuse any until it has dried completely. Otherwise you have the cooling effect that is great on sheetmetal. You can spray on rust inhibitor to prevent flash rust....gives you a couple of weeks to prep and primer. Last edited by flatheadmurre; 07-06-2020 at 03:50 AM. |
07-06-2020, 01:21 AM | #8 |
Senior Member
Join Date: Jul 2019
Location: Southern Oregon
Posts: 783
|
Re: Wet sand blasting??
https://www.ebay.com/itm/Sand-Blasti....c100047.m2108
Same unit but, a little cheaper. Soda blasters are much more expensive but, you can blast thin sheet metal (steel & Alum) with out damage.
__________________
Frank '35 Ford Model 51 '48 Ford F3 '54 Ford Tudor Mainline |
07-06-2020, 06:26 AM | #9 | |
Senior Member
Join Date: May 2010
Location: East Hartford, Ct
Posts: 5,898
|
Re: Wet sand blasting??
Quote:
The media was the consistency of powdered sugar.
__________________
DON'T RECALL DOING SOMETHING FOR MYSELF BASED ON SOMEONE ELSE'S LIKES OR DISLIKES |
|
07-06-2020, 03:36 PM | #10 |
Senior Member
Join Date: Jul 2019
Location: Southern Oregon
Posts: 783
|
Re: Wet sand blasting??
The reason I know about it, is because I was a sub-contractor for Erickson Air Crane. Before they bought the rights to manufacturer, the Sikorsky 64, they bought all the surplus stuff they could find and blasted it. Not just to clean it but, the paint has weight to it and painting over old paint, adds weight, that at is a premium in aircraft.
__________________
Frank '35 Ford Model 51 '48 Ford F3 '54 Ford Tudor Mainline |
07-07-2020, 09:48 PM | #11 |
Senior Member
Join Date: Oct 2015
Location: Bonita, CA
Posts: 1,374
|
Re: Wet sand blasting??
On aircraft such as the F/A 18, we used plastic media blasting. In the early days, the media was made from grinding up plastic buttons!
|
07-07-2020, 10:02 PM | #12 |
BANNED
Join Date: Dec 2019
Posts: 1,196
|
Re: Wet sand blasting??
Blasted mine with a 20lb pot,in a plastic booth..summertime,95 plus heat.learned my lesson.Wet ? Dry? walnut shells? next time it doesnt matter as long as I dont do it. |
07-08-2020, 12:10 AM | #13 |
Senior Member
Join Date: May 2010
Posts: 2,528
|
Re: Wet sand blasting??
Hi; The commercial unit showed up at my place ,contained on a car trailer, compressor and all. Hooked up to my water hose and wet-blasted a '39 cpe shell in my gravel yard. One yr later no rust as I work on that shell, inside. I posted it on an old thread here. they used a rust inhibitor in the mix and the sand went into my gravel. Newc
|
07-08-2020, 09:23 AM | #14 |
Senior Member
Join Date: Jun 2010
Location: San Antonio, Texas
Posts: 16,511
|
Re: Wet sand blasting??
Some of the turbine engines I've worked on call out the type of cleaning methods that are acceptable for certain parts. Wet grit blast is one but they use a specific grit that is light duty on abrasion or it would ruin the parts. The equipment is specially made for it. Walnut shell, plastic media, and soda media are all common grits for turbine engine parts. Glass media has to be pretty fine to be able to use it. Most of these medias require the parts to be washed and scrubbed well before application of protective coatings or assembly in an engine.
I could see grit blasting on some steel or corrosion resistant steel aircraft parts but not so much on thin aluminum structures. It would ruin things quickly. I've always used stripper to remove paint and primer but it has to be acid based stripper to remove Super Koropon epoxy primers. That was the only thing that would touch it 35-years ago. Cee Bee A-202 was the last one I used but I don't know if it is even available anymore with the modern EPA regulations. They have some newer technology stuff now that might even be better. A person has to be careful sand blasting thin steel too. They claim that those wet blast rigs won't warp steel but it depends on how thick the skin is and how rough the sand or other media is. Metal that is thin from corrosion could get wavy if blast force is held in one place too long. Sand is harsh blasting media. I've always used glass bead myself. |
07-08-2020, 02:03 PM | #15 |
Senior Member
Join Date: Jul 2019
Location: Southern Oregon
Posts: 783
|
Re: Wet sand blasting??
I've warped .093 sheet aluminum, taking epoxy paint off of it, using glass beads.
What happens is that you peen the surface, distorting it, in comparison to the off side. Even if you try to peen the other side, with the beads, it never comes out even, in my experience.
__________________
Frank '35 Ford Model 51 '48 Ford F3 '54 Ford Tudor Mainline |
07-09-2020, 01:01 PM | #16 |
Senior Member
Join Date: Oct 2015
Location: Socal
Posts: 795
|
Re: Wet sand blasting??
Never done it (wet sand blasting) but I've seen folks do it or get it done from a mobile vendor though.
I've also seen dry ice blasting. |
07-09-2020, 03:18 PM | #17 |
Senior Member
Join Date: Jun 2010
Location: San Antonio, Texas
Posts: 16,511
|
Re: Wet sand blasting??
It leaves only the CO2 gas and the removed crud as residue but the EPA likely doesn't like it much.
If it's done under a shade tree, the tree might like it. |
07-10-2020, 04:19 AM | #18 | |
Senior Member
Join Date: May 2010
Location: East Hartford, Ct
Posts: 5,898
|
Re: Wet sand blasting??
Quote:
That, along with excessive air pressure is a recipe for disaster.
__________________
DON'T RECALL DOING SOMETHING FOR MYSELF BASED ON SOMEONE ELSE'S LIKES OR DISLIKES Last edited by 51 MERC-CT; 07-10-2020 at 06:01 AM. |
|
07-10-2020, 08:25 AM | #19 |
Senior Member
Join Date: May 2010
Location: new britain,ct 06052
Posts: 9,393
|
Re: Wet sand blasting??
When I worked at Pratt and Whitney in the 60's in the overhaul shop, if there was no work, sometimes we'd be farmed out to where the rotor blades were "blasted". Only thing I remember about it was that after a while my hands would get so cold it was like having them in a snowbank because of the water/grit combo.
Paul in CT |
07-10-2020, 08:55 AM | #20 |
Senior Member
Join Date: Apr 2015
Location: Sweden
Posts: 3,045
|
Re: Wet sand blasting??
Thereīs a few different aproaches to wetblasting to....the cabinets and some pots use a slurry and pump it up to the nossle.
I have a nossle i use in my normal blasting setup that ad a tiny amount of water and i can use whatever media with it. Water acts like a cushion and coolant so calms down the cutting of the media and cools the surface to avoid warping. |
|
|
Sponsored Links (Register now to hide all advertisements) |
|