Go Back   The Ford Barn > General Discussion > Model T (1909-1927)

Sponsored Links (Register now to hide all advertisements)

Reply
 
Thread Tools Display Modes
Old 02-05-2016, 02:33 PM   #1
Kelly mt
Member
 
Kelly mt's Avatar
 
Join Date: Jun 2011
Location: Noxon, MT
Posts: 83
Question 14mm Plugs

I'm buying a Prus high compression head and need to know the pros and cons of the 14mm spark plugs. Opinions? PK
Kelly mt is offline   Reply With Quote
Old 02-05-2016, 10:37 PM   #2
redmodelt
Senior Member
 
redmodelt's Avatar
 
Join Date: May 2010
Location: Portland OR
Posts: 6,363
Default Re: 14mm Plugs

My Op is go with the 1/2 openings. You can use the adapters if you want to use 14mm plugs but might find that it is hard to find non resister plugs. If you are running coils the resister plugs don't like the voltage spikes I have found that they don't hold up very well. If you use the 1/2 in original type plugs you might find the car runs better. Others will have different OP but that's mine.
redmodelt is offline   Reply With Quote
Sponsored Links (Register now to hide all advertisements)
Old 02-06-2016, 04:51 PM   #3
Sundiesel
Junior Member
 
Join Date: Jun 2013
Posts: 25
Default Re: 14mm Plugs

Sponsored Links (Register now to hide all advertisements)
With a HC head and 14mm adapters, you'll have a very wide range of spark plugs to choose from to get the car to run just right.
With a low compression (Stock) head, I've found that I can get my cars, to start easier and idle smoother using good old Champion X's.
Cheers,
Rob
Sundiesel is offline   Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 10:45 AM.