The Ford Barn

J Witt · 03-25-2015, 11:56 PM

Hi to all. Just registered to the Ford Barn and am looking forward to reading the information here.

I have rekindled an interest in Model As and seem to have some interest from the boss as well, so this is the beginning of the research process. I have done frame off restorations on a 1926 Model T roadster, a 1912 Model T Touring car and a 1948 Willys CJ2A Jeep, so I'm not entirely new to the process. Of course there is a ton of information particular to the Model A that I'll need to acquire, so here we go!

John

foxfire42 · 03-26-2015, 12:08 AM

Welcome aboard......You've come to the right place.

Barber31 · 03-26-2015, 12:30 AM

Good to have you here.

Goldhardt · 03-26-2015, 12:43 AM

You've come to the right place. These guys have a wealth of knowledge and are willing to share!

Anteek29 · 03-26-2015, 12:49 AM

Welcome to the gang! You will be amazed at the wealth of technical info. and
talent in the forum postings.

stewwolfe · 03-26-2015, 06:02 AM

Sponsored Links (Register now to hide all advertisements)

Welcome.

Jwilli · 03-26-2015, 07:31 AM

J Witt welcome to the forum. I live in your area, if I can be of help send me a PM.

MrBruce · 03-26-2015, 08:03 AM

Welcome neighbor

Rojo · 03-26-2015, 08:24 AM

Welcome! Lots of help here...

burner31 · 03-26-2015, 08:48 AM

Welcome...The best folks are "Barn" folks.

racingrufus · 03-26-2015, 09:22 AM

Welcome, a lot of info and help on this forum. Dwayne

JohnLaVoy · 03-26-2015, 09:30 AM

Welcome, there is a good parts vendor not too far from you Mikes-A-Fordable there web: www.mikes-afordable.com They are in Maysville nice folks they have a little gathering the first weekend of June I think lots of As you might want to take that in.

Jwilli · 03-26-2015, 10:19 AM

I have been to Grandfather's day at Mike's. It is worth the trip.

jax55 · 03-26-2015, 01:37 PM

Welcome to the Barn!! Anything you need to know, just ask. The answers are here.

Scott Hall · 03-26-2015, 01:52 PM

Welcome

Michael M · 03-26-2015, 06:59 PM

Welcome! You'll find a great bunch here with a wealth of knowledge freely given.

Good luck with your project!

03-26-2015, 12:08 AM	#2
foxfire42 Senior Member Join Date: May 2010 Location: AZ and WA Posts: 764	Re: New forum member Welcome aboard......You've come to the right place.

03-26-2015, 12:30 AM	#3
Barber31 Senior Member Join Date: Jul 2013 Location: San Antonio, Texas Posts: 687	Re: New forum member Good to have you here.

03-26-2015, 12:43 AM	#4
Goldhardt Senior Member Join Date: May 2014 Location: Commercial Point, Ohio Posts: 239	Re: New forum member You've come to the right place. These guys have a wealth of knowledge and are willing to share!

03-26-2015, 12:49 AM	#5
Anteek29 Senior Member Join Date: Dec 2014 Location: Santa Maria, CA Posts: 986	Re: New forum member Welcome to the gang! You will be amazed at the wealth of technical info. and talent in the forum postings. __________________ Alan 1929 Special Coupe 1941 Pick-Up 1955 Victoria

03-26-2015, 06:02 AM	#6
stewwolfe Senior Member Join Date: Jun 2010 Location: North Chesterfield, VA Posts: 299	Re: New forum member Sponsored Links (Register now to hide all advertisements) Welcome. __________________ '31 40B '31 68C

03-26-2015, 07:31 AM	#7
Jwilli Senior Member Join Date: Apr 2014 Location: Kennesaw, Ga Posts: 511	Re: New forum member J Witt welcome to the forum. I live in your area, if I can be of help send me a PM.

03-26-2015, 08:03 AM	#8
MrBruce Senior Member Join Date: Oct 2014 Location: Charlotte, NC Posts: 311	Re: New forum member Welcome neighbor

03-26-2015, 08:24 AM	#9
Rojo Member Join Date: Dec 2014 Location: Texas Hill Country Posts: 35	Re: New forum member Welcome! Lots of help here...

03-26-2015, 08:48 AM	#10
burner31 Senior Member Join Date: Dec 2014 Location: Shawnee, Ok Posts: 3,471	Re: New forum member Welcome...The best folks are "Barn" folks. __________________ Keith Shawnee OK '31 SW 160-B

03-26-2015, 09:22 AM	#11
racingrufus Senior Member Join Date: Jun 2013 Location: alabama Posts: 146	Re: New forum member Welcome, a lot of info and help on this forum. Dwayne

03-26-2015, 09:30 AM	#12
JohnLaVoy Senior Member Join Date: Jun 2014 Location: Rocklin, CA Posts: 779	Re: New forum member Welcome, there is a good parts vendor not too far from you Mikes-A-Fordable there web: www.mikes-afordable.com They are in Maysville nice folks they have a little gathering the first weekend of June I think lots of As you might want to take that in.

03-26-2015, 10:19 AM	#13
Jwilli Senior Member Join Date: Apr 2014 Location: Kennesaw, Ga Posts: 511	Re: New forum member I have been to Grandfather's day at Mike's. It is worth the trip.

03-26-2015, 01:37 PM	#14
jax55 Senior Member Join Date: May 2014 Location: Santa Barbara, Ca Posts: 329	Re: New forum member Welcome to the Barn!! Anything you need to know, just ask. The answers are here.

03-26-2015, 01:52 PM	#15
Scott Hall Junior Member Join Date: Jun 2013 Location: Germantown, Ohio Posts: 13	Re: New forum member Welcome

03-26-2015, 06:59 PM	#16
Michael M Senior Member Join Date: Apr 2013 Location: Middlesex County, NJ Posts: 298	Re: New forum member Welcome! You'll find a great bunch here with a wealth of knowledge freely given. Good luck with your project!