The Ford Barn

tennsmith · 10-20-2010, 10:02 PM

Looking for a X member (the central one, not front or rear) and the side pieces that go from the side frame rails to the center of the X. Mine was butchered in an engine swap and I have only a portion of the rear part of it, the rest being cut away. I'd be willing to drive a couple of hundred miles to get it.

It needs to be complete, meaning I need the part that lies within the side rails as well.

Thanks,

Robert Smith/Huntsville, AL

Reds34 · 10-21-2010, 08:52 PM

PM sent.

Red

Cool 33 · 10-22-2010, 06:59 PM

Hi, I'm about 20 miles east of Dallas, Tex. I have a center frame section with side rails, x member, side braces, pedals, floorpan, seat tracks, etc. It is for mechanical brake car, so I'm guessing 35-36. I'd take $200.00 for it if you are interested. Steve 469-474-6189

tennsmith · 10-22-2010, 08:20 PM

Sponsored Links (Register now to hide all advertisements)

Thanks for the response Steve, I've about decided to go with an aftermarket X member. Even with the stock unit, a lot of modification is required to accommodate an overdrive automatic and I'm not sure it's worth the effort. I appreciate your offer.

Robert Smith/Huntsville, AL

10-20-2010, 10:02 PM	#1
tennsmith Member Join Date: Oct 2010 Posts: 53	X member for 36 Ford City: Huntsville State: AL Looking for a X member (the central one, not front or rear) and the side pieces that go from the side frame rails to the center of the X. Mine was butchered in an engine swap and I have only a portion of the rear part of it, the rest being cut away. I'd be willing to drive a couple of hundred miles to get it. It needs to be complete, meaning I need the part that lies within the side rails as well. Thanks, Robert Smith/Huntsville, AL

10-21-2010, 08:52 PM	#2
Reds34 Senior Member Join Date: Jun 2010 Location: Eastern, CT Posts: 527	Re: X member for 36 Ford PM sent. Red

10-22-2010, 06:59 PM	#3
Cool 33 Senior Member Join Date: May 2010 Location: Forney, Tex. Posts: 144	Re: X member for 36 Ford Hi, I'm about 20 miles east of Dallas, Tex. I have a center frame section with side rails, x member, side braces, pedals, floorpan, seat tracks, etc. It is for mechanical brake car, so I'm guessing 35-36. I'd take $200.00 for it if you are interested. Steve 469-474-6189

10-22-2010, 08:20 PM	#4
tennsmith Member Join Date: Oct 2010 Posts: 53	Re: X member for 36 Ford Sponsored Links (Register now to hide all advertisements) Thanks for the response Steve, I've about decided to go with an aftermarket X member. Even with the stock unit, a lot of modification is required to accommodate an overdrive automatic and I'm not sure it's worth the effort. I appreciate your offer. Robert Smith/Huntsville, AL