|
Sponsored Links (Register now to hide all advertisements) |
|
![]() |
![]() |
Thread Tools | Display Modes |
![]() |
#1 |
Member
Join Date: Jan 2016
Location: Norman, OK
Posts: 72
|
![]()
Still out enjoying my new pickup and getting used to my shifting. Put quite a few miles on it this week but have a few things to work out. The old truck sure gets a lot of attention. The front end has been rebuilt with the exception of the steering box. The truck drives well but has some play in the box. I noticed you can get a rebuild kit for the original steering box. I did get a used steering box with the truck and was thinking about rebuilding that unit. Are these usually good to rebuild or is there a better replacement steering box ? I'd rather rebuild the original unit, if possible.
|
![]() |
![]() |
![]() |
#2 |
Member
Join Date: Jan 2016
Location: Norman, OK
Posts: 72
|
![]()
Will a 41-48 steering box work on the 36, if the steering shaft is changed ?
|
![]() |
![]() |
Sponsored Links (Register now to hide all advertisements) |
|
![]() |
#3 |
Member
Join Date: Jan 2016
Location: Norman, OK
Posts: 72
|
![]() Sponsored Links (Register now to hide all advertisements)
|
![]() |
![]() |
![]() |
Thread Tools | |
Display Modes | |
|
|
Sponsored Links (Register now to hide all advertisements) |
|