|
Sponsored Links (Register now to hide all advertisements) |
|
![]() |
![]() |
Thread Tools | Display Modes |
![]() |
#1 |
Senior Member
Join Date: Nov 2010
Location: Franklin, TN
Posts: 124
|
![]()
I am finally putting together the floor assembly for my 68-B. I am stuck on the sheet metal panel under the seat. I have an adjustable seat. Can anyone tell me what sheet metal part will fit, or come close to fitting? As best I can tell, it should have a tool tray as opposed to being just a flat panel. Thanks
|
![]() |
![]() |
![]() |
#2 |
Senior Member
Join Date: May 2010
Location: Auburn Washington
Posts: 2,556
|
![]()
30-31 coupes have the same panel it gets nailed in the 68B`s and riveted in the coupe they do not come predrilled, so you can drill yourself. I used counter sunk screws the originals were nailed in.
Last edited by jw hash; 01-17-2016 at 12:25 PM. |
![]() |
![]() |
Sponsored Links (Register now to hide all advertisements) |
|
![]() |
#3 |
Senior Member
Join Date: May 2010
Posts: 333
|
![]()
I have a 68B with the stationary seat and thought the adjustable seat took a different tool pan. Not positive but maybe someone could verify. I could send you a photo of what the stationary pan looks like. Norm
|
![]() |
![]() |
![]() |
#4 |
Senior Member
Join Date: May 2010
Location: Auburn Washington
Posts: 2,556
|
![]()
I`m on number 2 of 3 late 68B`s number one is done and gone number two is finally painted and number three is in progress all have the adjustable seat. they take the same pan under the seat as the 30-31 coupe.
|
![]() |
![]() |
![]() |
#5 |
Senior Member
Join Date: May 2010
Posts: 333
|
![]()
Brattons and Snyders show some photos and dimensions for the 30 & 31 Coupes. They also mention pans for the late Cabriolet but I think they are for the 68C. Norm
|
![]() |
![]() |
![]() |
#6 |
Senior Member
Join Date: Nov 2010
Location: Franklin, TN
Posts: 124
|
![]() Sponsored Links (Register now to hide all advertisements)
|
![]() |
![]() |
![]() |
#7 |
Senior Member
Join Date: May 2010
Location: Auburn Washington
Posts: 2,556
|
![]()
the Bratton`s part # you need is 35640. the late coupe and 68C are different
|
![]() |
![]() |
![]() |
Thread Tools | |
Display Modes | |
|
|
Sponsored Links (Register now to hide all advertisements) |
|