Plating

[woodlot1]

Where can a guy get a dash panel correctly plated in the midwest????? I have 2 1930-1 brass ones that need plating

[Russ Koch]

Where are you located?

[wrndln]

Try Custom Plating Specialist in Brillion, WI. I have had 4 radiator shells nickel plated and a number of other items plated and am totally satisfied. They do a great job. Terry Meetz is the owner. They usually can give you a quote over the phone or with a picture attached to an email. Phone number - 920 756 3284, email [email protected].
Rusty Nelson

[John Duden]

Originally Posted by wrndln

Try Custom Plating Specialist in Brillion, WI. I have had 4 radiator shells nickel plated and a number of other items plated and am totally satisfied. They do a great job. Terry Meetz is the owner. They usually can give you a quote over the phone or with a picture attached to an email. Phone number - 920 756 3284, email [email protected].
Rusty Nelson

to be honest, i have sent work to them and DID NOT have a very plesant experience! i have never and will never be treated so poorly by a company ever again! and deal with all of their excuses. I hope they treat other customers with higher standards then i recieved
John

[wrndln]

Boy, John, you sure had a different experience than me. Terry and Steve have been very pleasant to me. I can't imagine them treating a customer the way you described. They fixed a couple problems (some minor dents in a couple radiator shells not caused by them at no additional cost. They didn't catch the minor dents until I inspected the shells. After they fixed the dents, I couldn't tell were they ever were. I sure would like to know who you had problems with.
Rusty Nelson

[Ray P]

Sponsored Links (Register now to hide all advertisements)

Craig Riker plated mine and did an excellent job.


Sent from my iPad using Tapatalk

[31Tudor]

There are some people that are Model A specialists, instead of just platers. Craig Riker knows what to do and you are not re-inventing what you want done with any plater.

[brito36]

I have used Craig Riker several times and was well pleased with his work.

[CarlG]

Ask Don Turley where he gets his plated. I bought one of his instrument panels and it is just great!