|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
10-13-2010, 03:32 PM | #1 |
Senior Member
Join Date: May 2010
Location: Above the gnat line in Georgia
Posts: 7,009
|
Dash lights 35-36 Fords
Is there some trick to get the dash lights to show up in all gauges? Speedometer and gauges on left light up real well. The ones on the right side do not light up at all. The bulb burns, but will not light up the gauges. Nothing seems bent. Green plastic lens seems to be in place, but the bulb is positioned too far to the left, not directly over the green plastic "light opening". Anyone else have this problem? How did you fix it? Inquiring minds want to know. lol
|
10-13-2010, 09:13 PM | #2 |
Senior Member
Join Date: May 2010
Location: Southern OR.
Posts: 222
|
Re: Dash lights 35-36 Fords
Lawson Mine must be very close to yours as the two lights are near even in the spedo, The Fuel gauge lights up the bezel & tube enough to see the fluid. The Amp and Temp Bezel is lit up but the fluid / needle are in the dark, flash light would be required dark... Hadn't played with it in the dark before.
|
Sponsored Links (Register now to hide all advertisements) |
|
10-14-2010, 07:44 AM | #3 |
Junior Member
Join Date: May 2010
Location: Evergreen, CO
Posts: 20
|
Re: Dash lights 35-36 Fords
Sponsored Links (Register now to hide all advertisements)
|
Thread Tools | |
Display Modes | |
|
|
Sponsored Links (Register now to hide all advertisements) |
|