The Ford Barn

david.skinner · 08-13-2015, 03:55 AM

getting close to having done sufficient engine related maintenance work (ignition, fueling, oil, cooling) on my wife's 36 colonial cab pickup I am starting to think about the dash and birds nest of wiring underneath. The start of this is to target what an original 36 roadster dash (on which I understand these colonial cabs are based on) looked like and then make allowances for the RHD and anything that might be impractical to repair (the original temp gauge?). Ours has an ignition key in the dash, and at least one spare hole in the dash so does anyone have a photo of what they are meant to look like?
Regards
David

08-13-2015, 03:55 AM	#1
david.skinner Member Join Date: Apr 2015 Location: Wellington NZ Posts: 85	36 roadster dash photos? getting close to having done sufficient engine related maintenance work (ignition, fueling, oil, cooling) on my wife's 36 colonial cab pickup I am starting to think about the dash and birds nest of wiring underneath. The start of this is to target what an original 36 roadster dash (on which I understand these colonial cabs are based on) looked like and then make allowances for the RHD and anything that might be impractical to repair (the original temp gauge?). Ours has an ignition key in the dash, and at least one spare hole in the dash so does anyone have a photo of what they are meant to look like? Regards David

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode