|
Sponsored Links (Register now to hide all advertisements) |
|
![]() |
![]() |
Thread Tools | Display Modes |
|
![]() |
#1 |
Senior Member
Join Date: May 2010
Posts: 4,179
|
![]()
1. Open gas line, then close gas line.
2. Start car & allow engine to run until it uses up gas this amount of gas in carb & gas line. 3. Repeat step one, omit step 2., loosen fitting at sediment bulb to brake the vacuum effect, & remove drain plug at bottom of carb, & allow to drain in a measuring cup. 4. Convert ounces to gallons -- should give a "rough" idea of gallons per hour at idling with "no"' load on engine. |
![]() |
![]() |
![]() |
Thread Tools | |
Display Modes | |
|
|
Sponsored Links (Register now to hide all advertisements) |
|