Steering Column Support Bracket - Help Needed

[sconnors]

Originally Posted by Steve Plucker

You have the wrong bracket I think...There were two size's, a short one and a long one...you need the short one.

The difference was with Steering Column Support--Upper brackets, A-3520-E (short) and A-3520-F (long). The use of the long bracket, A-3520-F, which formed the A-3523-G (long) assembly (Fig. 22 Right), was for use on the 180-A Deluxe Phaeton, 190-A Victoria Coupe, 295-A Town Car Delivery and 330-A School Bus Body according to the May 1931 Ford Service Bulletin. However the newly released 400-A Convertible Sedan and 330-B Passenger Bus Body also used this assembly according to the Part Releases.
The use of the short bracket, A-3520-E, which formed the A-3523-F (short) assembly (Fig. 22 Left), was for all other body styles according to the Part Releases. They were also to be "paint(ed) with (the) body after assembly (to the body)" as stated on the releases themselves. However this practice wasn’t always followed and some were installed prepainted in black enamel.


See my website about these brackets in the 30-31 Gas tank section in Additional Studies.

Pluck

Steve
Thanks but the catalogs and parts houses only sell one bracket? Any idea where to get a short one?

[Steve Plucker]

Originally Posted by sconnors

Steve
Thanks but the catalogs and parts houses only sell one bracket? Any idea where to get a short one?

Try Bert's in Denver OR maybe someone on the barn might have one.

If it were me, I just could not be going down the road and seeing a gapping hole down there knowing that I should of done it right in the first place...BUT, that is me.

Pluck

[sconnors]

Originally Posted by Steve Plucker

Try Bert's in Denver OR maybe someone on the barn might have one.

If it were me, I just could not be going down the road and seeing a gapping hole down there knowing that I should of done it right in the first place...BUT, that is me.

Pluck

Thanks Steve, I'll give Bert's a call see if they have one. I agree with you about the gaping hole too!!

[sconnors]

Originally Posted by Steve Plucker

Try Bert's in Denver OR maybe someone on the barn might have one.

If it were me, I just could not be going down the road and seeing a gapping hole down there knowing that I should of done it right in the first place...BUT, that is me.

Pluck

Steve
Called Bert's and they said that the only other one they are aware of is a longer one made for the Victoria. They said the one I have is the "right" one as there was only the two manufactured. Oh well I guess I'll go wit it given no other choice.