1928 Tudor door to body installation

[Tinbasher]

Just a thought. When your screwing in the top plate screws make sure they are not too long as they will damage the outside part of the door. In the window opening area. Also how do your doors fit the opening? Do the body lines line up? Sometimes the door can be too high in the door opening and you'll have to loosen the hinge screws and drop the door down to make things line up. Where is the door frame hitting? At the front of the door or the rear? Looking at the pictures it's hard to tell. If it's hitting at the front and the bodylines are good, you may have to hammer up the front section of the door jam at the "A" pillar.


The Old Tinbasher