The Ford Barn

nosbod · 02-26-2014, 01:59 PM

Well I knew I wouldn't be disappointed and am very grateful for the informative responses. All the parts used were quality US products and the pilot bearing is in good order as well. It seems that I will follow the advice of Tom and others and pay attention to the tower and check thoroughly for any lost movement causing 3rd not to be selected properly as that seems to be the most likely source of the problem.I will let you know what transpires.
Many thanks.
John

02-26-2014, 01:59 PM	#19
nosbod Member Join Date: Jul 2012 Location: Herefordshire UK Posts: 55	Re: 3rd Gear Well I knew I wouldn't be disappointed and am very grateful for the informative responses. All the parts used were quality US products and the pilot bearing is in good order as well. It seems that I will follow the advice of Tom and others and pay attention to the tower and check thoroughly for any lost movement causing 3rd not to be selected properly as that seems to be the most likely source of the problem.I will let you know what transpires. Many thanks. John

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode