Go Back   The Ford Barn > General Discussion > Model A (1928-31)
Reload this Page Changing the steering wheel in a 31 Tudor

Sponsored Links (Register now to hide all advertisements)

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 01-05-2014, 09:54 AM   #2
Tom Wesenberg
Senior Member
 
Tom Wesenberg's Avatar
 
Join Date: May 2010
Location: Mpls, MN
Posts: 27,582
Default Re: Changing the steering wheel in a 31 Tudor
Remove the tank clamp and the two bolts mounting the steering to the frame. Hopefully this will give you enough drop to remove the light switch rod. You might need a special puller for the steering wheel, as some are stuck very tight. DO NOT hammer on the threads.
Tom Wesenberg is offline   Reply With Quote
Sponsored Links (Register now to hide all advertisements)
 

« Previous Thread | Next Thread »
Thread Tools
Display Modes
Threaded Mode Threaded Mode

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 11:25 PM.