|
Sponsored Links (Register now to hide all advertisements) |
|
![]() |
![]() |
Thread Tools | Display Modes |
![]() |
#1 |
Senior Member
Join Date: May 2010
Location: Nevada
Posts: 258
|
![]() City:
Sparks
State:
Nevada
Price:
$250
I'm taking orders to have a few 21 stud pressure testing plates made. These are invaluable for locating an engine issue, either in the cylinder head, or block. The plate is 1/2", with a 1/4" sealing gasket, both 100% accurate by scanning, and water jetted. I'm not supplying any block off plates, as 32-36 is different to 37 center outlets. If interested, text or call Doug 775-219-8241. Price will be $250 each.
A plate is already available for the 24 stud engine from Speedway, but the plate is only 3/8" thick, and costs $279. There are NO 21 STUD PRESSURE CHECKING PLATES CURRENTLY AVAILABLE!! (I just discovered a small pin hole in a combustion chamber, which saved me from pulling the engine) |
![]() |
![]() |
![]() |
#2 |
Senior Member
Join Date: May 2010
Location: Nevada
Posts: 258
|
![]()
Btt
|
![]() |
![]() |
Sponsored Links (Register now to hide all advertisements) |
|
![]() |
#3 |
Senior Member
Join Date: May 2010
Location: Nevada
Posts: 258
|
![]() Sponsored Links (Register now to hide all advertisements)
|
![]() |
![]() |
![]() |
Thread Tools | |
Display Modes | |
|
|
Sponsored Links (Register now to hide all advertisements) |
|