Go Back   The Ford Barn > General Discussion > Early V8 (1932-53)

Sponsored Links (Register now to hide all advertisements)

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 03-18-2023, 01:31 PM   #6
37fatfender
Senior Member
 
37fatfender's Avatar
 
Join Date: May 2010
Location: Mesquite, NV / Gurnee, IL
Posts: 314
Default Re: Full flow remote oil filter kit for a late flathead V8

Sponsored Links (Register now to hide all advertisements)
“My” experience was you do have to install an internal plug in the oil feed internal line to the rear main, otherwise that oil is NOT filtered. The back of the block is drilled and a bypass line is installed to feed the rear main with filtered oil. My advice is to contact Red’s see if they can at least supply you with the drawings. I do think Red Hamilton has retired or sold the business. Good Luck
37fatfender is offline   Reply With Quote
 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 04:47 AM.