Go Back   The Ford Barn > General Discussion > Early V8 (1932-53)
Reload this Page ‘40 V8 stumbling when accelerating in 1st and 2nd

Sponsored Links (Register now to hide all advertisements)

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 07-18-2022, 02:35 PM   #6
alanwoodieman
Senior Member
 
Join Date: May 2010
Location: upstate SC
Posts: 3,000
Default Re: ‘40 V8 stumbling when accelerating in 1st and 2nd
Sponsored Links (Register now to hide all advertisements)
I had a similar problem and now I always insulate the shaft going thru the dizzy, use two layers of shrink tape. Have not had that problem again. ps cut the old rotor button in two and you could see the carbon tracking on the inside
alanwoodieman is offline   Reply With Quote
 

« Previous Thread | Next Thread »
Thread Tools
Display Modes
Threaded Mode Threaded Mode

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 01:44 PM.