The Ford Barn

Black Fifty · 09-07-2020, 11:30 AM

Don't know if you still need a picture of that cable clip for the OD, but here's the one on my '50 Custom Deluxe. Haven't found a part number though. Have you checked with Mac VanPelt?
Mike

mrlaser · 09-07-2020, 12:14 PM

That's great. I haven't found another picture of the bracket. I see that it is attached to the top bolt holding the solenoid which is where I currently have it fastened with a cable clamp. Unfortunately that puts the cable in a bind. I will try Mac Vanpelt next week. Thanks so much for posting the picture.

Black Fifty · 09-07-2020, 01:58 PM

I'll take a couple of pictures that show how the rest of the cable is routed from the firewall down to the trans on mine. It's a pretty straight shot to that solenoid the way it's setup.

Mike

09-07-2020, 12:14 PM	#2
mrlaser Senior Member Join Date: Sep 2019 Location: Savannah, Ga Posts: 232	Re: 1951 Ford overdrive That's great. I haven't found another picture of the bracket. I see that it is attached to the top bolt holding the solenoid which is where I currently have it fastened with a cable clamp. Unfortunately that puts the cable in a bind. I will try Mac Vanpelt next week. Thanks so much for posting the picture.

09-07-2020, 01:58 PM	#3
Black Fifty Senior Member Join Date: Oct 2018 Location: The Thumb of Michigan Posts: 107	Re: 1951 Ford overdrive I'll take a couple of pictures that show how the rest of the cable is routed from the firewall down to the trans on mine. It's a pretty straight shot to that solenoid the way it's setup. Mike

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode