Go Back   The Ford Barn > General Discussion > Model A (1928-31)

Sponsored Links (Register now to hide all advertisements)

Reply
 
Thread Tools Display Modes
Old 07-14-2020, 03:05 PM   #1
Kozmonot
Junior Member
 
Join Date: Jul 2020
Posts: 11
Default Re: "Doodlebug"

Thanks for the feedback. The current fuel line is set up basically bypassing the sediment bowl as far as I can see. I had originally assumed the "farmer" just did something weird but in looking at a few photos online such as the one below, about 1 in 20 seem to have that extra line heading into the intake header. Other intake headers have a plug in that hole.

Being an ignorant cuss, I may just be misinterpreting things based on what a farmer with about 9 beers in him decided was "right" at the time.

Found that I did have a photo of the firewall on mine here at the office. The "revised" fuel line is through a hole in the firewall.
Attached Images
File Type: jpg Engine shot.jpg (42.5 KB, 62 views)
File Type: jpg odd fuel line.jpg (20.3 KB, 61 views)

Last edited by Kozmonot; 07-14-2020 at 03:23 PM.
Kozmonot is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 10:06 AM.