Sport Coupe Resurrection - Debris in Bores

[WHN]

Originally Posted by TheDude

After looking into this further over the weekend. It looks like the "debris" I was referring to is carbon deposits around the valves and on top of the pistons. I guess everyone's advice is still to pull the head and clean it up? I actually removed all the head bolts yesterday, but the head wont budge so I'll have to look into using a puller.

Put some penetrating oil on head studs. Than put plugs back in. Make sure you remove distributor. Put a few of the head nuts back on very loose.

Now hit your starter. Head should pop right up. Enjoy.