|
|
09-19-2017, 09:34 AM
|
#1 |
|
Member
Join Date: Jan 2011
Posts: 67
|
Re: Split intake
Heat stress crack from crossover. If it were me and I just wanted to drive it, I would smear heat resistant epoxy into the crack until I could replace it.
It is possible that there may be cracks into the intake ports, but I doubt it. There are no water jackets so if there is a leak you would see it on the plugs after a while but I wouldn't be concerned about anything else other than cosmetics. |
|
|
|
09-19-2017, 11:12 AM
|
#2 |
|
Member
Join Date: Oct 2010
Location: Atl
Posts: 66
|
Re: Split intake
Pulled the intake off last night. The heat ports where blocked with off with cuts of tin. Opposite side of crack the tin only covered 3/4 of the hole.
|
|
|
|
| Sponsored Links (Register now to hide all advertisements) |
|
|
 |
«
Previous Thread
|
Next Thread
»
| Thread Tools | |
| Display Modes | |
Hybrid Mode
|
|
| Sponsored Links (Register now to hide all advertisements) |
|
|
All times are GMT -5. The time now is 05:19 PM.