|
Sponsored Links (Register now to hide all advertisements) |
|
![]() |
![]() |
Thread Tools | Display Modes |
|
![]() |
#1 |
Member
Join Date: Oct 2012
Location: Minneapolis, MN
Posts: 67
|
![]()
I actually did this with my gas tank four years ago. Our 29 Std Coupe had sat in my Mother-in-Laws garage for 20 years and it was rusted top to bottom. I did cycle it through three times letting it soak overnight each time. As I drained it I did make an attempt to strain the fluid through a cloth over the bucket. When completed the interior of my tank looked like a new tank. It worked great! I totally recommend this approach for tank cleaning. It may work even better if your tank is off your car and you can agitate it a bit. After I was done, the mixture was still not saturated and was able to be used to remove rust from other loose parts I had.
__________________
Joe Minneapolis, MN 1929 Std Coupe |
![]() |
![]() |
![]() |
#2 |
Senior Member
Join Date: May 2010
Location: Oregon
Posts: 1,462
|
![]()
Agitation and a warm solution greatly enhance the results. I have used a closed container filled with Evaporust plus small rusted parts placed in the back of the pickup, with normal driving providing the agitation.
I have plans to use this solution in my gas tank sometime this summer. In my coupe I am thinking about using a temporary firewall mounted tank for the fuel supply while the 911 solution sloshes around in the cowl tank as I am driving around town. Any thoughts about this venture? |
![]() |
![]() |
Sponsored Links (Register now to hide all advertisements) |
|
![]() |
#3 | |
Member
Join Date: Sep 2013
Location: Central FL
Posts: 72
|
![]() Quote:
![]()
__________________
Bob |
|
![]() |
![]() |
![]() |
Thread Tools | |
Display Modes | |
|
|
Sponsored Links (Register now to hide all advertisements) |
|