Go Back   The Ford Barn > General Discussion > Model A (1928-31)

Sponsored Links (Register now to hide all advertisements)

Reply
 
Thread Tools Display Modes
Old 03-07-2017, 11:12 PM   #1
dave11
Member
 
Join Date: Sep 2012
Location: Lillooet BC Canada
Posts: 59
Default Re: hood differences

On my 30 coupe the length at the top of the hood side aprons measure 31.5" at the top.
30" at the bottom measuring front to back. This leaves a 1/2" gap at the bottom.
Is this standard with a 30 hood? or do I have the wrong hood ?
dave11 is offline   Reply With Quote
Old 03-08-2017, 12:11 PM   #2
George Miller
Senior Member
 
George Miller's Avatar
 
Join Date: May 2010
Location: NC
Posts: 2,975
Default Re: hood differences

Quote:
Originally Posted by dave11 View Post
On my 30 coupe the length at the top of the hood side aprons measure 31.5" at the top.
30" at the bottom measuring front to back. This leaves a 1/2" gap at the bottom.
Is this standard with a 30 hood? or do I have the wrong hood ?
Sounds like you frame is sagging at the rear motor mount, a lot of them do. No one wants to check the frame because they think they are ok.
George Miller is offline   Reply With Quote
Sponsored Links (Register now to hide all advertisements)
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 09:59 PM.