Hubley Screw Set

[ltdann]

I bought a Hubley 1931 Phaeton model at our monthly business meeting. To my chagrin, the screw set was missing. Does anyone know what sizes and how many are needed to assemble this model?

Rich

[Ray64]

i dont know but i have the same problem and cant find a set either. If you find a source message me. Thanks RAY

[Tom Wesenberg]

I would take the model to the local hardware store and see if they have some pan head sheet metal screws the correct size.

[Ray in La Mesa]

Contact Jack Simmons at "[email protected]". He carries most all the Hubley parts individually.

[RichardW]

The axles use 4-40 fillister head screws. I have found them but it takes a good hardware store. I usually use one a little longer so it doesn't tend to back out. A SMALL amount of locktite helps too.

[29spcoupe]

Sponsored Links (Register now to hide all advertisements)

I have a hubley model a that is missing the front hubs. I think everything else is there. I paid $25 for it and would sell it for that plus shipping. John

[Y-Blockhead]

Try "Ralph the Hubley Man" 562-863-0302

[Bob Johnson]

Here is what you want. They are a bit longer than the originals but that will help keep the wheels on.

Hubley Screws

Bob

[5window]

Originally Posted by Bob Johnson

Here is what you want. They are a bit longer than the originals but that will help keep the wheels on.

Hubley Screws

Bob

If you belong to the Farm Bureau, you get a discount and free shipping from Grainger. (I belong because I also get a really nice discount on car insurance form Nationwide)