Go Back   The Ford Barn > General Discussion > Model A (1928-31)
Reload this Page Hood alignment

Sponsored Links (Register now to hide all advertisements)

Reply
 
Thread Tools Display Modes
Old 03-05-2016, 11:21 PM   #1
SeaSlugs
Senior Member
 
SeaSlugs's Avatar
 
Join Date: May 2010
Location: Central, IL
Posts: 3,968
Default Re: Hood alignment
attach near the front of the frame and rear of the frame to something sturdy that will not move, then out the jack under the motor mount area of the frame and bend it back upwards.
__________________
1929 Model AA - Need long splash aprons!
SeaSlugs is offline   Reply With Quote
Old 03-06-2016, 05:06 AM   #2
Tom Wesenberg
Senior Member
 
Tom Wesenberg's Avatar
 
Join Date: May 2010
Location: Mpls, MN
Posts: 27,582
Default Re: Hood alignment
Quote:
Originally Posted by SeaSlugs View Post
attach near the front of the frame and rear of the frame to something sturdy that will not move, then out the jack under the motor mount area of the frame and bend it back upwards.
Yes, it would be quick and easy for a body shop with a frame rack.
Tom Wesenberg is offline   Reply With Quote
Sponsored Links (Register now to hide all advertisements)
Reply

« Previous Thread | Next Thread »
Thread Tools
Display Modes
Hybrid Mode Hybrid Mode

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 06:32 PM.