Go Back   The Ford Barn > General Discussion > Model A (1928-31)

Sponsored Links (Register now to hide all advertisements)

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 03-04-2016, 11:40 AM   #3
Sunnybrook Farm
Senior Member
 
Sunnybrook Farm's Avatar
 
Join Date: Oct 2015
Location: Virginia
Posts: 409
Default Re: Restorers: Did your body metal parts assemble easily?

Much of it comes down to the frame and how years of flexing in various directions causes the bolt holes all over the car to be slightly off even after a restoration. Then consider that the body parts are stretched and patched as well. Even if the frame were riveted again there might be some bend in the steel. It is hard to make it like new after 85+ years.
Sunnybrook Farm is offline   Reply With Quote
 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 01:51 PM.