The Ford Barn

Kray_Z-1 · 01-27-2016, 08:59 PM

Is the machine work on the OFFY heads complete crap like my manifold? I opted for Edelbrock heads after seeing the crap quality of the OFFY product. The Edelbrock's are beautiful. The one I got are good to .400 lift. my cam is .375 but the deck was milled a little so I had trouble closing the gaps on Champion rc12yc's . I replaced them with autolites that have the same reach, but the electrode is about 1/16 shorter, then I added Moroso indexing washers to shim the plug out a little more. Now she runs gRRRReeeaaT!!

01-27-2016, 08:59 PM	#9
Kray_Z-1 Junior Member Join Date: Jan 2016 Posts: 17	Re: Spark plug reach Is the machine work on the OFFY heads complete crap like my manifold? I opted for Edelbrock heads after seeing the crap quality of the OFFY product. The Edelbrock's are beautiful. The one I got are good to .400 lift. my cam is .375 but the deck was milled a little so I had trouble closing the gaps on Champion rc12yc's . I replaced them with autolites that have the same reach, but the electrode is about 1/16 shorter, then I added Moroso indexing washers to shim the plug out a little more. Now she runs gRRRReeeaaT!!

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode