Go Back   The Ford Barn > General Discussion > Model A (1928-31)

Sponsored Links (Register now to hide all advertisements)

Reply
 
Thread Tools Display Modes
Old 01-15-2015, 12:12 PM   #1
jboggess
Senior Member
 
jboggess's Avatar
 
Join Date: Feb 2011
Posts: 112
Default Re: Reintroducing my Model A

Thanks for the comments guys. This car was not a barn find though, we bought this car from a guy who wills and deals with Model A Fords and all what he does is takes spare parts and just puts them together. He didn't even have the decency to take the birds nest out of the water pump before he put the engine together. Here are some pictures before he sold it to me and as you can see in the one picture of the snow covered A's in the back ground. Poor A's
Attached Images
File Type: jpg A 1.jpg (134.1 KB, 102 views)
File Type: jpg A 2.jpg (141.2 KB, 98 views)
File Type: jpg A 5.jpg (131.0 KB, 96 views)
File Type: jpg A3.jpg (133.1 KB, 101 views)
File Type: jpg DSC01684.JPG (132.4 KB, 127 views)
jboggess is offline   Reply With Quote
Old 05-27-2015, 10:14 AM   #2
jboggess
Senior Member
 
jboggess's Avatar
 
Join Date: Feb 2011
Posts: 112
Default Re: Reintroducing my Model A

Still here and slowly but surely the A will get done, we went for our first ride a few months ago, runs wells and shifts very nice. Since we replaced all of the engine mounts and added the small front engine spring in front (didnt have one before) it takes off just smooth as smooth, no more chattering. .. The only thing is about after 10 minutes of each ride the car starts to boil, i read some where that it might be a bad head gasket? The engine only got a valve job and new water pump and that was it. Also we finally got the head lights for it rebuilt, dad didn't want the chrome ones so we got the old ones re-nickle and put back together. Heres some pictures.
Attached Images
File Type: jpg IMG_0284.jpg (40.6 KB, 73 views)
File Type: jpg IMG_0285.jpg (35.9 KB, 69 views)
File Type: jpg IMG_0286.jpg (47.0 KB, 72 views)
jboggess is offline   Reply With Quote
Sponsored Links (Register now to hide all advertisements)
Old 04-07-2017, 08:20 AM   #3
Smurkey
Senior Member
 
Smurkey's Avatar
 
Join Date: Nov 2011
Location: Esko, MN
Posts: 257
Default Re: Reintroducing my Model A

Quote:
Originally Posted by jboggess View Post
Still here and slowly but surely the A will get done, we went for our first ride a few months ago, runs wells and shifts very nice. Since we replaced all of the engine mounts and added the small front engine spring in front (didnt have one before) it takes off just smooth as smooth, no more chattering. .. The only thing is about after 10 minutes of each ride the car starts to boil, i read some where that it might be a bad head gasket? The engine only got a valve job and new water pump and that was it. Also we finally got the head lights for it rebuilt, dad didn't want the chrome ones so we got the old ones re-nickle and put back together. Heres some pictures.
Mine did the same thing. Eliminated everything motor related, even flow tested the radiator and it was good...It was the radiator.

Had it re-cored and she runs cool as a cucumber since.

Steve
Smurkey is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 11:58 PM.