The Ford Barn

mikebishop · 05-29-2014, 06:28 PM

Vern Tardel and I are writing a how-to book on flathead rebuilding and modification. We need a presentable engine shot of each year ('32-'53/'54) either in a car/truck or on a stand. The included photo is the type we're looking for. This one is a '34 (with '32 heads) in an excellent tour-quality '32 Victoria. We'd like to have a '32 with a true '32 engine but haven't been able to turn one up in our area where most early Fords have been hot-rodded at least a little bit.

The file size for this image is 6361.11 KB, and measured 3264 x 2448 pixels before being reduced to fit here. E-files, in full format, can be sent directly to my e-mail account . . . [email protected]

We have a very modest photo-buy budget but I will negotiate with contributors on an individual basis. Photos used will receive a credit if desired and a copy of the final book.

Thanks in advance for any and all help.

Mike Bishop

05-29-2014, 06:28 PM	#1
mikebishop Member Join Date: May 2010 Location: Santa Rosa, California Posts: 63	Looking for engine pictures Vern Tardel and I are writing a how-to book on flathead rebuilding and modification. We need a presentable engine shot of each year ('32-'53/'54) either in a car/truck or on a stand. The included photo is the type we're looking for. This one is a '34 (with '32 heads) in an excellent tour-quality '32 Victoria. We'd like to have a '32 with a true '32 engine but haven't been able to turn one up in our area where most early Fords have been hot-rodded at least a little bit. The file size for this image is 6361.11 KB, and measured 3264 x 2448 pixels before being reduced to fit here. E-files, in full format, can be sent directly to my e-mail account . . . [email protected] We have a very modest photo-buy budget but I will negotiate with contributors on an individual basis. Photos used will receive a credit if desired and a copy of the final book. Thanks in advance for any and all help. Mike Bishop