Rookie with an engine problem

[Shelby1962]

Mr. Rogers...Thanks for the suggestions on the tinfoil and everyone else that replied. As you can see from the photos the engine maybe fresh but whoever did the babbit work should be banned from doing this kind of work! The clearance was .006 but the thrust was good at .004. Had a friend come over with Les Andrews book and he helped with the main clearance. It's now within spec. Put it all back together and ran it for 45 minutes and no leaks yet. Not sure how long it will live but it appears to be OK for now. Not the most confident on the engine but it sure is a pretty thing.