06-07-2013, 01:10 PM
|
#2 |
|
Senior Member
Join Date: Aug 2010
Location: Port Orchard, WA
Posts: 1,498
|
Re: testing jets
Here is the one I built. 36" from centerline of overflow to centerline of test port. Valve is to throttle the pump flow. Do not use an elbow at the top for overflow unless you drill it at the top to vent the column. This is necessary as the syphon action of the overflow can reduce the column pressure.
__________________
1931 160B & 1931 68B If you don't have time to do it right the 1st time, how do you have time to do it the 2nd time? Last edited by 160B; 06-07-2013 at 01:21 PM. |
|
|
| Sponsored Links (Register now to hide all advertisements) |
|
|
«
Previous Thread
|
Next Thread
»
Threaded Mode
|
|
| Sponsored Links (Register now to hide all advertisements) |
|
|
All times are GMT -5. The time now is 12:04 PM.