The Ford Barn

56servi · 03-19-2013, 11:35 AM

My 31 S/W had the LogoLites LED turn signals on it before the garage fire. 2 of the bumper lights were melted in the fire. Since I have to do something I would like to convert the cowl lights & rear brake lights into the turn signals.

I tested the controller on the bench using the 2 good lights testing both the left & right sides. The controller works fine with the LED lights. I hooked up my 2 tail lights to try with the standard bulbs & they did not flash as I suspected.
If I replace the bulbs with LED bulbs in the cowl lights & the led lens setup in the tail lights. I don't have any 6v LED bulbs to test with.

Has anyone done this
Do you think it will work.

03-19-2013, 11:35 AM	#1
56servi Senior Member Join Date: Nov 2012 Location: Commerce Twp, Mi Posts: 143	LogoLites Turn Signal Mod Question My 31 S/W had the LogoLites LED turn signals on it before the garage fire. 2 of the bumper lights were melted in the fire. Since I have to do something I would like to convert the cowl lights & rear brake lights into the turn signals. I tested the controller on the bench using the 2 good lights testing both the left & right sides. The controller works fine with the LED lights. I hooked up my 2 tail lights to try with the standard bulbs & they did not flash as I suspected. If I replace the bulbs with LED bulbs in the cowl lights & the led lens setup in the tail lights. I don't have any 6v LED bulbs to test with. Has anyone done this Do you think it will work.