Overdrive or not???

[John LaVoy]

Originally Posted by 29RPU

Ok, rookie question, but the above Volvo...This is essentially like the Mitchell correct, looks to be in the driveline. So where does one get the Volvo version? Is there fabrication to create this? What is the volvo deal? Thanks.

You are correct the Volvo and BorgWarner are fabrication pieces. When looking at these you have to have faith in the person doing the fabrication that the alignment is correct in the torque tube and the welds are good. We did an article in the Model A Times Summer 2005 where we compared the three available overdrives and listed vendors who did the fabrication. We installed all three units in cars and tested them out.