The Ford Barn

Lembomw · 04-06-2012, 01:42 PM

I am rebuilding my 30 Tudor and would like to install seat adjusters since the 30 Tudors did not have any. I have read prior posts regarding the seat adjuster kit that the vendors sell (Snyder’s PN A-47904). From what I have read, by installing this kit I will add only 2 inches of adjustment.

I have not found any description of how much adjustment I can get if I install the standard saw tooth adjustor that is in the ’31 Deluxe Tudor (Snyder’s PN A-70124). Does anyone know how much adjustment is available using the original saw tooth type adjuster? I understand that by installing these that the seats will not pivot any longer. Is there any difference in the adjustment available using the saw tooth vs the screw type (Snyder’s PN A-47832-S) seat adjuster?

Thanks, Mark

04-06-2012, 01:42 PM	#1
Lembomw Senior Member Join Date: May 2010 Location: Orange County, NY Posts: 162	Seat Adjuster - 30 Tudor I am rebuilding my 30 Tudor and would like to install seat adjusters since the 30 Tudors did not have any. I have read prior posts regarding the seat adjuster kit that the vendors sell (Snyder’s PN A-47904). From what I have read, by installing this kit I will add only 2 inches of adjustment. I have not found any description of how much adjustment I can get if I install the standard saw tooth adjustor that is in the ’31 Deluxe Tudor (Snyder’s PN A-70124). Does anyone know how much adjustment is available using the original saw tooth type adjuster? I understand that by installing these that the seats will not pivot any longer. Is there any difference in the adjustment available using the saw tooth vs the screw type (Snyder’s PN A-47832-S) seat adjuster? Thanks, Mark