The Ford Barn

NCSUDucker · 04-27-2026, 07:27 AM

Good morning all. I had an alignment done on my 39 tonner last week. Nice to have the spokes facing the correct orientation on my steering wheel now. With diesel having been up close to $6 a gallon I've put a couple of thousand miles on the 39 in the last 2 to 3 months including a few out of town trips.

My question is my light switch and horn orientation are off and from what I can find on here in addition to the alignment issue, my light switch isn't set up correctly, as it seems that is supposed to click CC for lights and CW for park lights. Mine is CCW once for lights, and 2x CCW for park lights. Lastly, the V8 logo on the horn button is sitting sideways.

I'm assuming remove the lower half of the switch house and rotate the rod for the light issue but any help on either aligning the horn or correcting the light switch issue would be greatly appreciated.

Thanks,
Brad

04-27-2026, 07:27 AM	#1
NCSUDucker Senior Member Join Date: Jun 2024 Location: Salisbury, NC Posts: 112	Aligning Light/Horn Switch Good morning all. I had an alignment done on my 39 tonner last week. Nice to have the spokes facing the correct orientation on my steering wheel now. With diesel having been up close to $6 a gallon I've put a couple of thousand miles on the 39 in the last 2 to 3 months including a few out of town trips. My question is my light switch and horn orientation are off and from what I can find on here in addition to the alignment issue, my light switch isn't set up correctly, as it seems that is supposed to click CC for lights and CW for park lights. Mine is CCW once for lights, and 2x CCW for park lights. Lastly, the V8 logo on the horn button is sitting sideways. I'm assuming remove the lower half of the switch house and rotate the rod for the light issue but any help on either aligning the horn or correcting the light switch issue would be greatly appreciated. Thanks, Brad