Wiper Motor

[sconnors]

My wiper was hardly working, when on it would move a couple of inches and then nothing. I have good vacuum, and tried the method outlined with the 3 in 1 oil and attaching a hose. It was a little better traveled about half way then stopped.
So I pulled the wiper motor, disassembled it (see pics) it was gobbed with dried grease, so I cleaned everything up, reassembled and it when I turned it by hand on the bench it was 100% better as prior to that I could barely turn the thing.
Reassembled, put everything back on the car and now it doesn't move at all. I ordered a kit from Snyder's and am going to try that and see if it makes a difference. Anyone have any other input?
Thanks in advance.