The Ford Barn

38 coupe · 08-05-2025, 05:36 AM

Wow, that's unusual. The 4 speed transmissions are typically near indestructible. These 4 speed non synchro (crash box) transmissions have little to no value, I have been given and given away several of these over the years. Maybe look around locally to see if anyone is giving one away that you could get gears from if needed? I agree, I would put bearings and gaskets in at a minimum.
Is it the original transmission to the truck? If yes it should have the serial number of the truck stamped into the flat area above the throw out bearing inspection hole.

08-05-2025, 05:36 AM	#21
38 coupe Senior Member Join Date: May 2010 Location: South Texas Posts: 2,135	Re: '35 Model 51 Transmission Removal Wow, that's unusual. The 4 speed transmissions are typically near indestructible. These 4 speed non synchro (crash box) transmissions have little to no value, I have been given and given away several of these over the years. Maybe look around locally to see if anyone is giving one away that you could get gears from if needed? I agree, I would put bearings and gaskets in at a minimum. Is it the original transmission to the truck? If yes it should have the serial number of the truck stamped into the flat area above the throw out bearing inspection hole.