The Ford Barn

Drbrown · 02-28-2025, 07:10 PM

I also found that the add-on noise beepers/buzzers I found were very annoying. So I drilled two 1/8" diameter holes in my '47 Speedo dial face just inside to speed markings - (one at 3 O'clock and one at 9 O'clock for right and left functions) and inserted an 1/8" red colored LED electronics bulb in each. I connected them to the proper side of the turn signal wiring using a small resister on each to drop from the car voltage to their rating. Bright enough in day light, its a visual reminder in my face.

02-28-2025, 07:10 PM	#9
Drbrown Senior Member Join Date: Oct 2013 Location: Glens Falls NY Posts: 1,355	Re: Turn Signals I also found that the add-on noise beepers/buzzers I found were very annoying. So I drilled two 1/8" diameter holes in my '47 Speedo dial face just inside to speed markings - (one at 3 O'clock and one at 9 O'clock for right and left functions) and inserted an 1/8" red colored LED electronics bulb in each. I connected them to the proper side of the turn signal wiring using a small resister on each to drop from the car voltage to their rating. Bright enough in day light, its a visual reminder in my face.