|
|||||||
| Sponsored Links (Register now to hide all advertisements) |
|
|
|
Thread Tools | Display Modes |
|
|
#1 |
|
Junior Member
Join Date: May 2023
Posts: 18
|
Recently I replaced stop light switch but I still don’t have any brake lights. I ran new ground wires from housing to frame. I put in new 1157 bulbs and making good contact. Both leads are hot and both filaments are lit when I turn on my lights. Still no brake lights. I have double checked all wiring.
|
|
|
|
|
|
| Sponsored Links (Register now to hide all advertisements) |
|
|