The Ford Barn

32Ford13 · 07-20-2024, 12:13 PM

As per Paul's video, I installed the complete Bratton's wiring harness with turn signals. Pretty plug and play, nicely done. Once complete, I noticed my turn signals didn't work. First step was to test the flashers (I had a few). All good except one. Not the problem. So last night, I double checked the wiring diagram and forgot about the inline 14A fuse. Saw it was blown, changed it and tried the signals. This time the pilot light on the turn signal on the steering column, lit up for about a second, then went out. Checked the fuse and blown again. Hmmmmm. I've been studying this brown wire and where it goes, and can't figure out what might be the issue. Haven't taken a meter to anything yet, I figured that I would enlist you guys to give me a direction before I call Brattons.
Any ideas boys?
Thank you in advance for your input.

07-20-2024, 12:13 PM	#1
32Ford13 Member Join Date: Oct 2023 Posts: 62	Bratton harness turn signal fuse keeps blowing As per Paul's video, I installed the complete Bratton's wiring harness with turn signals. Pretty plug and play, nicely done. Once complete, I noticed my turn signals didn't work. First step was to test the flashers (I had a few). All good except one. Not the problem. So last night, I double checked the wiring diagram and forgot about the inline 14A fuse. Saw it was blown, changed it and tried the signals. This time the pilot light on the turn signal on the steering column, lit up for about a second, then went out. Checked the fuse and blown again. Hmmmmm. I've been studying this brown wire and where it goes, and can't figure out what might be the issue. Haven't taken a meter to anything yet, I figured that I would enlist you guys to give me a direction before I call Brattons. Any ideas boys? Thank you in advance for your input.