The Ford Barn

Jack E/NJ · 01-13-2024, 03:35 PM

Brian>>tried everything to no avail, culminating with removing the intake manifold and applying grease to both sides of the gasket and rebolting it down which cured the problem!>>

Also a good possibility. IMO, smearing wheel bearing grease on all 4 gasket, block & manifold surfaces is where it's at (except exhaust).

As a quickie test for vacuum leaks --- when engine seems to be missing, try spraying WD-40 or smearing grease on manifold edges around problem cylinders to see if it tries to smooth out.

01-13-2024, 03:35 PM	#11
Jack E/NJ Senior Member Join Date: May 2010 Posts: 2,272	Re: 47 V8 ignition mystery Brian>>tried everything to no avail, culminating with removing the intake manifold and applying grease to both sides of the gasket and rebolting it down which cured the problem!>> Also a good possibility. IMO, smearing wheel bearing grease on all 4 gasket, block & manifold surfaces is where it's at (except exhaust). As a quickie test for vacuum leaks --- when engine seems to be missing, try spraying WD-40 or smearing grease on manifold edges around problem cylinders to see if it tries to smooth out.