New to V-8's

[BillCNC]

Hey All,

Model A guy here and I had the good luck of buying a 21 stud v-8 that is coupled to a giant generator that's mounted on a trailer. I only want the motor and the guy is removing the motor and all parts associated with it, and will drop it off in a few hours.

The motor turns freely, but the butterfly on the carb is locked. I tried starting it a couple of times but didn't want to press it until I can prep the motor properly before I start it.

I have a fair amount of the model A engine experience, but nothing on the v-8. It hasn't run in a few years and I just don't want to attack it blindly.

I was wondering what I should be doing before starting her?

Regards
Bill