The Ford Barn

jerryt · 03-05-2022, 06:36 PM

Hi I have finally put the correct master cylinder on. But I have another problem. The rubber hose that goes to the drum brakes are clogged from years of neglect. But the hard lines to this are in a bad spot. I have to take out the radiator and grill. But I can bend the hard lines just enough and place a bracket under the frame. Just for my sanity which would you all do? Take of the radiator and grill? Or put a small tab and run the union of hard line to a new rubber hose?
Thanks
Jerry

03-05-2022, 06:36 PM	#1
jerryt Member Join Date: Jul 2021 Posts: 77	take a poll Hi I have finally put the correct master cylinder on. But I have another problem. The rubber hose that goes to the drum brakes are clogged from years of neglect. But the hard lines to this are in a bad spot. I have to take out the radiator and grill. But I can bend the hard lines just enough and place a bracket under the frame. Just for my sanity which would you all do? Take of the radiator and grill? Or put a small tab and run the union of hard line to a new rubber hose? Thanks Jerry