FH high dome heads NA

[Bored&Stroked]

BTW, I have nothing against OHV Hemi Engines :

Here is a blown early 392 with Donovan 417 heads that I've built for my 34 coupe. This is just a mockup in my shop. It will have a Crower 8 port injector on it (converted to EFI). Now, if I can just get back to Ohio and find some more time (project has been in mothballs for a decade!)

Attachment 485508

Here is a look at the ports and rockers . . . some huge airflow (these were top-fuel heads). They'd only work on the street with a blower:

Rockers-IntakePorts copy.jpg

Here is the new blower/injector setup - both magnesium.

2017-12-07 23.15.49.jpg

Here is another 'Hemi' project:

Ardun-ScotBlown1 copy.jpg

And here is a new 14-71 blower design I'm working on - just about done with it. It is for high-end competition - mostly BBC and Hemi platforms. It will be whacked out of a chunk of 6061 billet aluminum. Just finishing up all the NC Toolpath work - hope to be making prototypes shortly:

NewBlower-F16-HurricaneForce.jpg