The Ford Barn

hrs1948 · 12-23-2021, 03:40 PM

In the continuing saga of trying to piece together a seat for my 1936 3 window coupe I was wondering if anyone has paper templates or dimensioned photos / drawings for the backrest spring wood frame (the part that swings up), the cushion spring wood frame, and the plywood side panels. Looking at old threads, there is one from 2019 started by 50droptop, initially in regard to the shouldered pivot bolt used with the backrest prop assembly. As part of the discussion there is a fantastically helpful series of photos posted by Karl Wescott. One of them is of a fully dimensioned wood backrest support (the stationary part). I would PM Karl and 50droptop directly, but I do not have enough posts to qualify for PMing. BTW, if you look at Karl's photos one shows the center brace in the steel seat base that I refer to in my post re: '36 coupe seat frames from earlier today. Thank you - any help much appreciated!

12-23-2021, 03:40 PM	#1
hrs1948 Junior Member Join Date: Sep 2013 Location: Hinterlands of Canada Posts: 27	Wood Pieces for 1936 Coupe Seat In the continuing saga of trying to piece together a seat for my 1936 3 window coupe I was wondering if anyone has paper templates or dimensioned photos / drawings for the backrest spring wood frame (the part that swings up), the cushion spring wood frame, and the plywood side panels. Looking at old threads, there is one from 2019 started by 50droptop, initially in regard to the shouldered pivot bolt used with the backrest prop assembly. As part of the discussion there is a fantastically helpful series of photos posted by Karl Wescott. One of them is of a fully dimensioned wood backrest support (the stationary part). I would PM Karl and 50droptop directly, but I do not have enough posts to qualify for PMing. BTW, if you look at Karl's photos one shows the center brace in the steel seat base that I refer to in my post re: '36 coupe seat frames from earlier today. Thank you - any help much appreciated!