The Ford Barn

Veeder · 04-26-2021, 08:34 AM

I have the original 3 speed on the column transmission that about fivery years ago shortly after I rebuilt the thing the cone gear and slide gear was damaged. I purchased (at the time) a transmission to fill the gap but since day one I noticed (I think) an ever so slight difference in gear ratios.

So I'm attempting to truly identify this cone gear as there are about 15 different ones that will fit.
I have the following tooth count 29,24,18, & 14 with the shaft approx. 1 1/8 inches.

I believe the correct number s 022A-7113A.

I'm hoping to be sure I'm correct as I need to buy one and also a slide gear with 29 teeth.

Any help is appreciated!
Bob

04-26-2021, 08:34 AM	#1
Veeder Senior Member Join Date: Dec 2012 Location: CT Posts: 409	Transmission Cone Gear Identification I have the original 3 speed on the column transmission that about fivery years ago shortly after I rebuilt the thing the cone gear and slide gear was damaged. I purchased (at the time) a transmission to fill the gap but since day one I noticed (I think) an ever so slight difference in gear ratios. So I'm attempting to truly identify this cone gear as there are about 15 different ones that will fit. I have the following tooth count 29,24,18, & 14 with the shaft approx. 1 1/8 inches. I believe the correct number s 022A-7113A. I'm hoping to be sure I'm correct as I need to buy one and also a slide gear with 29 teeth. Any help is appreciated! Bob