Go Back   The Ford Barn > General Discussion > Model A (1928-31)

Sponsored Links (Register now to hide all advertisements)

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 11-12-2020, 04:16 PM   #1
john charlton
Senior Member
 
john charlton's Avatar
 
Join Date: May 2010
Posts: 1,343
Default 1929 AA Truck rear view mirror .

I bought an AA truck which came with no mirrors It does have the "d" nuts at the vizor end on the left side to attach a mirror . On the right side it has two for sure factory "d" nuts halfway up the "a" pillar . The truck is LHD so why does the cab have provision for a mirror on the right side ??? No mention of this in "The Double A,er" but it is "d5" but on the wrong side . I have looked at length through "You Tube" but have not found a similar cab with this feature . If the truck left the factory with two mirrors at different heights I think it would look a little odd so I cant think it did . The "d" nuts still had the 1/2" head bolts in place but they were flat topped not dome headed . These bolts had been in for a long long time and were not keen to unscrew also no "shadow" on the faded original (looks like) paint of where a mirror might have once been . Luckily being in RHD country a mirror on the right side is a must .My theory is that when the cab was being assembled a RHD "a" pillar was installed in error or they ran out of LHD ones .

John still in Suffolk County LOCKED DOWN AGAIN England .
john charlton is offline   Reply With Quote
 


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 04:08 PM.