Seven-tooth steering column "O" ring...

[Steve Plucker]

For those of you running a 7-tooth steering column, we are kind of worried about oil leaking from the steering sector, especially those sectors that do not have a grease zerk in that spot to fill the cavity with grease as later 7-tooth columns do.

That being the case, how many of you have added either the "Steering Sector O-Ring and flat washer" OR the "Steering Sector to Frame Seal-7 Tooth" where you have to bore the end of the sector to make it fit, and have had success with the adaptation in preventing oil leakage from the sector.

Do they work or not?

Thanks.

Pluck