Re: 29 Model A Project-Speedster?
I've nearly completed work on the body of my boat tail speedster. Here are a couple of pictures to show you the progress. I posted earlier to this thread. Again I'm, using a Model A frame, engine and running gear. I've shortened the frame and rear axle about 11 inches to get the proportions of the body right. I'm using a 32 front axle with Model A spindles and a reverse eye spring to lower the front end. I Z'd the rear of the frame and reduced the number of leafs in the rear spring to lower the rear. I reversed the location of the tie rod balls to get the proper clearance for the tie rod to the front cross member.
|