Lamp socket wire ends

[JMFL36]

I'm rewiring my '34 and plan on reusing all the lamp sockets as they are in good shape. Which is a very good thing as the re-pops are junk. Does anyone know where I might find the little wire ends that anchor the lamp wire to their sockets? The old ones are crimped on (not soldered) so I can't reuse them. They need to be added after you feed the new wire thru the back of the socket, so as to seat at the bottom of the front of the socket when the bulb is installed. One way would be to join the new harness to the old pigtails I left when I clipped out the old harness. But I'd rather not splice the wires if I don't have to.